http://biomassmagazine.com/articles/9308/kior-announces-q2-financial-results-discusses-expansion-plans/
KiOR
Inc. has released financial results for the second quarter, reporting
operational progress at its Columbus, Miss., plant. The company shipped
more than 75,000 gallons of cellulosic fuels during the three-month
period, which ended June 30.
“I am happy to report that Columbus has made significant operational
progress and is continuing to build its on-stream performance and
reliability," said Fred Cannon, president and CEO of KiOR. "In addition
to making our first shipment of cellulosic gasoline in the second
quarter, we more than doubled the run time of our core technology, the
Biomass Fluid Catalytic Cracking Unit, to 43 percent in the quarter, up
from 20 percent in the first quarter."
During a call to discuss the financial results, Cannon spoke about
three phases he said are necessary to bring a first-of-king facility to a
steady state of operation. First, there is a reliability phase that
concentrates on simply running the facility and building its on-stream
percentage, he said. Second is a throughput phase, which focuses
bringing the facility to nameplate capacity while maintaining the
on-stream percentage. Finally, the third phase focuses on optimization,
during which process efficiency is optimized, increasing yield.
According to Cannon, the facility has achieved significant progress of
the first phase and is beginning to work on the second stage.
Cannon also noted that the plant’s CFCC unit operated for just under
40 days during the second quarter, which doubled the quarterly on-stream
percentage. “Our first run was April 22 to April 27,” he said. “We then
started the BFCC back up on May 6 and rant it until May 12. We decided
to terminate both of these runs due to feed synchronization issues.
Nothing about the KiOR technology prevented the runs from going longer.”
The BFCC was brought back online on May 30 and operated through June
29. The 30-day run more than doubled the facility’s previous longest
individual run.
According to Cannon, a small repair requirement in the
wood yard necessitated the shutdown of that run.
He also stressed that nothing about the KiOR technology resulted in
these operational terminations.
“As has been the case since we first
started the facility, these issues are not related to our core
technology,” Cannon continued. “They are simply part of the break-in
process, and again, let me reiterate that our goal last quarter was to
keep the plant running as long as possible, not to push the plant from a
throughput standpoint. Our focus was on reliability, and we typically
ran Columbus at 40 percent to 50 percent of its nameplate capacity.”
Cannon said longer runs are KiOR’s main objective in the third
quarter. He also stressed that the plant is currently operating, with
high quality oil being produced and stored. “I anticipate that the
hydrotreater will start up shortly, meaning we will have fuel ready to
ship in the very near term,” he said, noting that the company’s focus
will likely not shift to process optimization and increasing yield until
the fourth quarter. “I look for us to achieve normal, steady-state
optimal operations at Columbus in the first half of 2014,” Cannon
continued.
During the call, Cannon also spoke about KiOR’s long-term business
plan, highlighting two developments that have factored into the
company’s strategic thinking. “First, we believe that we have made some
important gains in our research and development efforts that…can have a
significant impact on the operating efficiency and catalyst performance
of our technology at a commercial scale.” Second, Cannon said KiOR is
beginning to see traction on the commercial development of feedstocks
other than Southern Yellow Pine, including hardwood, energy crops and
waste products.
Cannon said the company expects to be able to procure
these alternative feedstocks at a lower price.
As a result of the two developments, combined with progress at the
Columbus facility, Cannon said KiOR is considering an alternative growth
strategy that would involve the construction of a second 500
bone-dry-ton-per-day facility adjacent to the existing Columbus plant.
While Cannon stressed that the company is still in the early stages of
evaluating the possible expansion, the move is exciting because it could
reduce the cost and time required to design, engineer and construct the
second facility. Cannon also said building a second plant adjacent to
the Columbus plant would be expected to reduce start-up and
commissioning risk as a result of shared experienced personnel, site
infrastructure, equipment and operational knowledge. “On a preliminary
basis, we expect that the total cost of this second 500 ton-per-day
commercial facility in Columbus will range from $175 million to $225
million,” he said, noting that current estimates shows cellulosic
gasoline and diesel could be produced at a cost of $2.60 to $2.80 per
gallon at a yield of 72 gallons per bone dry ton. At a yield of 92
gallons per bone dry ton, the cost would drop to $2.20 to $2.30 per
gallon.
KiOR has also continued to refine the design for its proposed
facility in Natchez, Miss. According to Cannon, the current estimated
cost to build that plant is $560 million to $600 million. “We also
estimate that this facility will be able to produce cellulosic gasoline
and diesel at a per-unit unsubsidized cost between $2.25 and $2.48 per
gallon at our current yield of 72 gallons per bone dry ton, excluding
cost of financing and facility depreciation,” he said. “This would
decrease to between $1.81 and $1.96 per gallon at our short-term yield
target of 92 gallons per ton.”
Regarding quarterly financial results, KiOR reported a net loss of
$38.5 million, or 36 cents per share, compared to a net loss of $31.1
million, or 30 cents per share, during the previous quarter. During the
second quarter of 2012. KiOR reported a net loss of $23 million, or 22
cents per share.
Revenues for the quarter equaled $239,000, up from $71,000 during the
first quarter of the year. The company posted no revenues for the
second quarter of 2012.
Showing posts with label technology. Show all posts
Showing posts with label technology. Show all posts
Monday, August 12, 2013
Friday, August 9, 2013
The slow creep of next-gen biofuels: KiOR misses production targets
http://gigaom.com/2013/08/09/the-slow-creep-of-next-gen-biofuels-kior-misses-production-targets/
This week KiOR, a venture capital-backed startup that went public in the Summer of 2011, revealed in its second quarter earnings that it was about 75 percent below its forecast for producing and shipping its next-gen biofuel last quarter. KiOR shipped 75,000 gallons last quarter from its Columbus, Mississippi plant, but was hoping to ship between 300,000 and 500,000 gallons in the quarter.
Revenue for the quarter was of course below estimates, too, alongside the slower than expected scale up in production. As a result, KiOR’s stock dropped almost 10 percent on Thursday, rallied a bit and is now trading around $4.14 on Friday. KiOR went public at $15 per share in mid-2011.
But it shouldn’t come as a surprise to anyone that’s been following any next-gen biofuel startup. It takes eons to get to the scale where they can make biofuels for cheap enough to compete with oil.
KiOR started producing its biocrude at the Columbus plant last November and started shipping it shortly after that. At the time KiOR CEO Fred Cannon called the first shipment “the world’s first cellulosic gasoline and diesel fuel products.”
KiOR has developed technology that allows it to convert biomass (plants and bio waste) into a bio substitute for crude oil. The company emerged in late 2007 as a joint venture between Khosla Ventures and Netherlands-based biofuel startup BIOeCON. Khosla Ventures provided the early rounds of funding and BIOeCON provided the intellectual property for its “biomass catalytic cracking process,” a thermochemical process that’s been used in the oil industry for decades and which turns out can also produce biocrude from grass, wood and plant waste.
Cannon has described KiOR’s technology as being able to do in seconds what has taken millions of years in nature (the natural process of how biomass has been crunched into oil).
About a year ago I wrote a really long indepth piece on KiOR. Check it out here: The perils of cleantech investing: KiOR and the long term, high risk view.
Summary:
Next-gen biofuel company KiOR misses its production targets from
its new biocrude making plant by 75 percent. It’s still slow going for
these companies trying to scale up and compete with oil.
If you’ve ever read anything about the next-generation of biofuels
— the ones made from plant waste, trash, or energy crops called
cellulosic ethanol — then you know that they’ve forever been trapped on
the brink of commercialization. The thesis still seems to apply for the
young companies that are trying to scale up.This week KiOR, a venture capital-backed startup that went public in the Summer of 2011, revealed in its second quarter earnings that it was about 75 percent below its forecast for producing and shipping its next-gen biofuel last quarter. KiOR shipped 75,000 gallons last quarter from its Columbus, Mississippi plant, but was hoping to ship between 300,000 and 500,000 gallons in the quarter.
Revenue for the quarter was of course below estimates, too, alongside the slower than expected scale up in production. As a result, KiOR’s stock dropped almost 10 percent on Thursday, rallied a bit and is now trading around $4.14 on Friday. KiOR went public at $15 per share in mid-2011.
But it shouldn’t come as a surprise to anyone that’s been following any next-gen biofuel startup. It takes eons to get to the scale where they can make biofuels for cheap enough to compete with oil.
KiOR started producing its biocrude at the Columbus plant last November and started shipping it shortly after that. At the time KiOR CEO Fred Cannon called the first shipment “the world’s first cellulosic gasoline and diesel fuel products.”
KiOR has developed technology that allows it to convert biomass (plants and bio waste) into a bio substitute for crude oil. The company emerged in late 2007 as a joint venture between Khosla Ventures and Netherlands-based biofuel startup BIOeCON. Khosla Ventures provided the early rounds of funding and BIOeCON provided the intellectual property for its “biomass catalytic cracking process,” a thermochemical process that’s been used in the oil industry for decades and which turns out can also produce biocrude from grass, wood and plant waste.
Cannon has described KiOR’s technology as being able to do in seconds what has taken millions of years in nature (the natural process of how biomass has been crunched into oil).
About a year ago I wrote a really long indepth piece on KiOR. Check it out here: The perils of cleantech investing: KiOR and the long term, high risk view.
Tuesday, March 19, 2013
KiOR announces cellulosic diesel shipment, 2012 financial results
http://www.biomassmagazine.com/articles/8745/kior-announces-cellulosic-diesel-shipment-2012-financial-results
Fred Cannon, KiOR’s president and CEO, called the cellulosic diesel shipment a major step forward for his company, the biofuels industry, and the renewable fuels sector. “With first production at Columbus, KiOR has technology with the potential to resurrect each and every shut down paper mill in the country and to replace imported oil on a cost effective basis while creating American jobs,” he said. “This facility demonstrates the efficacy of KiOR's proprietary catalytic biomass-to-fuel process with the potential to deliver cellulosic gasoline and diesel to the U.S. We are proud to be making history in Mississippi. The technology is simply scalable and we believe sufficient excess feedstock exists in the Southeast alone to build almost fifty KiOR commercial scale facilities."
Cannon added that the U.S. EPA’s recent actions to qualify cellulosic gasoline for the renewable fuel standard (RFS) market and increase the gasoline blend rate to 25 percent have de-risked KiOR’s business strategy and created a market for the company’s hydrocarbon fuels that is nearly twice the size of the current ethanol market.
During the fourth quarter of 2012, KiOR posted a net loss of $29.7 million, compared to a net loss of $27 million during the prior quarter. Net loss for the full year was $96.4 million, compared to a net loss of $64.1 million in 2011.
KiOR recorded its first revenues since inception during the final three months of 2012. The $87,000 in revenue is attributed to the sale of blended cellulosic diesel from the company’s research and development facility. The fuel was blended with fossil diesel. The cost of revenue for the quarter was $68,000, and related to the first sale, including production, shipping and blending costs.
During a call to discuss the results, Cannon noted his company faces three primary risks: technology scale-up risk, regulatory risk, and financial risk. Since the last financial update was made in November, Cannon said KiOR has made substantial progress in addressing all three risks.
“A mitigation of scale-up risk due to commercial production of cellulosic gasoline and diesel at Columbus is a remarkable achievement by the KiOR team,” he said. “ In four years we have successfully achieved a 20,000 ton scale up in our proprietary biomass to fuels technology from proof of concept in our pilot plant to our demonstration plant and now to our first commercial scale facility at Columbus.”
While KiOR had previously stated it expected commercial shipments of biofuels to commence in late 2012, Cannon noted the company encountered unexpected startup issues unrelated to its technology, but has since overcome those normal startup issues and proven that KiOR’s biomass-to-fuels technology works at commercial scale. “In fact, we know now that our technology performs better in terms of quality as it is scaled,” he continued. “From very good oil at the very small pilot plant to even improved quality oil at the demo and now to our best ever quality oil made at Columbus. So high in quality we’re converting over 90 percent of our oil from Columbus into transportation fuel.” The conversion rate for conventional crude oil is only about 70 percent, he added.
Regarding regulatory risk, Cannon said that the EPA’s recent pathway rulemaking was the last hurdle to KiOR’s ability to fully participate in the mandated RFS2 market. “What this means is that every gallon of cellulosic gasoline and diesel that comes out of KiOR’s Columbus facility and all our future facilities will generate 1.5 or 1.7 cellulosic grams per gallon, which unlocks significant additional value for KiOR relative to nearly all other renewable fuel companies,” he said.
Cannon also spoke about EPA’s approval of an increased Part 79 registration for blending KiOR’s cellulosic gasoline at levels up to 25 percent. “At a 25 percent blend, KiOR has a 33 billion gallon per year domestic market for its cellulosic gasoline. This is more than the entire RFS2 renewable volume obligation in 2022. By comparisons, this is double the size of the ethanol market and without any blend wall limitations,” Cannon continued.
During the call, Cannon also addressed two factors he said KiOR believes will de-risk its funding risk. First, he said, is the achievement of milestones. Second, he continued, is flexibility. “In our experience, one of the best ways to drive value in any financing process, whether debt or equity, is to have the flexibility to raise financing when the market allows a company to maximize the value for its existing shareholders,” he said, noting that Alberta Investment Management Co. and Vinod Khosla have agreed to amend the loan agreement KiOR signed last year in order to give the company flexibility it needs from a liquidity perspective to drive financing for the Natchez facility.
“Specifically, we have increased the potential launch under the agreement from $75 million of current principal to $125 million, with affiliates of Vinod Khosla committed to funding that additional $50 million upon request from the company,” Cannon continued. “If funded, this additional funding would automatically convert into equity in connection with future financing for the Natchez project, which further enhances our flexibility going forward.”
By Erin Voegele | March 19, 2013
On
March 18 KiOR Inc. announced the initial shipment of cellulosic diesel
from its commercial-scale plant in Columbus, Miss. On the same day, the
company reported financial results for the fourth quarter of 2012 as
well as the entire fiscal year. According to the financial release, KiOR
recorded its first revenues since inception during the fourth quarter
2012.Fred Cannon, KiOR’s president and CEO, called the cellulosic diesel shipment a major step forward for his company, the biofuels industry, and the renewable fuels sector. “With first production at Columbus, KiOR has technology with the potential to resurrect each and every shut down paper mill in the country and to replace imported oil on a cost effective basis while creating American jobs,” he said. “This facility demonstrates the efficacy of KiOR's proprietary catalytic biomass-to-fuel process with the potential to deliver cellulosic gasoline and diesel to the U.S. We are proud to be making history in Mississippi. The technology is simply scalable and we believe sufficient excess feedstock exists in the Southeast alone to build almost fifty KiOR commercial scale facilities."
Cannon added that the U.S. EPA’s recent actions to qualify cellulosic gasoline for the renewable fuel standard (RFS) market and increase the gasoline blend rate to 25 percent have de-risked KiOR’s business strategy and created a market for the company’s hydrocarbon fuels that is nearly twice the size of the current ethanol market.
During the fourth quarter of 2012, KiOR posted a net loss of $29.7 million, compared to a net loss of $27 million during the prior quarter. Net loss for the full year was $96.4 million, compared to a net loss of $64.1 million in 2011.
KiOR recorded its first revenues since inception during the final three months of 2012. The $87,000 in revenue is attributed to the sale of blended cellulosic diesel from the company’s research and development facility. The fuel was blended with fossil diesel. The cost of revenue for the quarter was $68,000, and related to the first sale, including production, shipping and blending costs.
During a call to discuss the results, Cannon noted his company faces three primary risks: technology scale-up risk, regulatory risk, and financial risk. Since the last financial update was made in November, Cannon said KiOR has made substantial progress in addressing all three risks.
“A mitigation of scale-up risk due to commercial production of cellulosic gasoline and diesel at Columbus is a remarkable achievement by the KiOR team,” he said. “ In four years we have successfully achieved a 20,000 ton scale up in our proprietary biomass to fuels technology from proof of concept in our pilot plant to our demonstration plant and now to our first commercial scale facility at Columbus.”
While KiOR had previously stated it expected commercial shipments of biofuels to commence in late 2012, Cannon noted the company encountered unexpected startup issues unrelated to its technology, but has since overcome those normal startup issues and proven that KiOR’s biomass-to-fuels technology works at commercial scale. “In fact, we know now that our technology performs better in terms of quality as it is scaled,” he continued. “From very good oil at the very small pilot plant to even improved quality oil at the demo and now to our best ever quality oil made at Columbus. So high in quality we’re converting over 90 percent of our oil from Columbus into transportation fuel.” The conversion rate for conventional crude oil is only about 70 percent, he added.
Regarding regulatory risk, Cannon said that the EPA’s recent pathway rulemaking was the last hurdle to KiOR’s ability to fully participate in the mandated RFS2 market. “What this means is that every gallon of cellulosic gasoline and diesel that comes out of KiOR’s Columbus facility and all our future facilities will generate 1.5 or 1.7 cellulosic grams per gallon, which unlocks significant additional value for KiOR relative to nearly all other renewable fuel companies,” he said.
Cannon also spoke about EPA’s approval of an increased Part 79 registration for blending KiOR’s cellulosic gasoline at levels up to 25 percent. “At a 25 percent blend, KiOR has a 33 billion gallon per year domestic market for its cellulosic gasoline. This is more than the entire RFS2 renewable volume obligation in 2022. By comparisons, this is double the size of the ethanol market and without any blend wall limitations,” Cannon continued.
During the call, Cannon also addressed two factors he said KiOR believes will de-risk its funding risk. First, he said, is the achievement of milestones. Second, he continued, is flexibility. “In our experience, one of the best ways to drive value in any financing process, whether debt or equity, is to have the flexibility to raise financing when the market allows a company to maximize the value for its existing shareholders,” he said, noting that Alberta Investment Management Co. and Vinod Khosla have agreed to amend the loan agreement KiOR signed last year in order to give the company flexibility it needs from a liquidity perspective to drive financing for the Natchez facility.
“Specifically, we have increased the potential launch under the agreement from $75 million of current principal to $125 million, with affiliates of Vinod Khosla committed to funding that additional $50 million upon request from the company,” Cannon continued. “If funded, this additional funding would automatically convert into equity in connection with future financing for the Natchez project, which further enhances our flexibility going forward.”
Labels:
biocrude,
biodiesel,
cellulosic gasoline,
employment,
EPA,
ethanol,
industry,
KiOR,
local communities,
markets,
Mississippi,
policy,
pulp and paper,
RFS,
rural development,
southeastern US,
technology
Wednesday, March 13, 2013
Cellulosic Ethanol Inches Forward
http://www.technologyreview.com/view/512501/cellulosic-ethanol-inches-forward/
Kevin Bullis
March 13, 2013
A few years ago, large scale, billion-gallon-a-year cellulosic ethanol production seemed around the corner. Instead we’ve seen companies fail, or scale back and delay their plans, as they find it hard to secure financing or bring down costs. The technology seems to have dropped off the radar, except for the occasional news of opposition to a mandate requiring the use of cellulosic ethanol.
Still, there are signs of progress. This week ZeaChem announced it started production at a 250,000 gallon demonstration plant that is making chemicals that can be used to make ethanol and other things. Two companies, Ineos and Kior, have finished construction at larger plants that can produce 8 and 11 million gallons of fuel. They’re in the process of starting those plants up. And Poet and Abengoa hope to finish construction on even larger plants—25 million gallon ones-by the end of the year.
It’s still not clear that these companies can make ethanol profitably. ZeaChem is hedging its bets. It can make ethanol if that’s the most profitable option. Or it can convert the acetic acid it makes to chemicals such as propylene. Other advanced fuels companies, such as Amyris, are also pursuing chemicals at first.
But there are plenty of challenges involved in trying to break into existing chemical markets, especially if the chemicals are low-cost commodities. For example, chemicals like propylene are typically made by big petrochemical companies at huge well-integrated plants that make many chemicals, and have low costs that will be hard to compete with.
March 13, 2013
The technology for making fuel from wood chips and grass is late, but still on the way.
Still, there are signs of progress. This week ZeaChem announced it started production at a 250,000 gallon demonstration plant that is making chemicals that can be used to make ethanol and other things. Two companies, Ineos and Kior, have finished construction at larger plants that can produce 8 and 11 million gallons of fuel. They’re in the process of starting those plants up. And Poet and Abengoa hope to finish construction on even larger plants—25 million gallon ones-by the end of the year.
It’s still not clear that these companies can make ethanol profitably. ZeaChem is hedging its bets. It can make ethanol if that’s the most profitable option. Or it can convert the acetic acid it makes to chemicals such as propylene. Other advanced fuels companies, such as Amyris, are also pursuing chemicals at first.
But there are plenty of challenges involved in trying to break into existing chemical markets, especially if the chemicals are low-cost commodities. For example, chemicals like propylene are typically made by big petrochemical companies at huge well-integrated plants that make many chemicals, and have low costs that will be hard to compete with.
Tuesday, March 12, 2013
Cellulosic Ethanol ‘to Be Cost Competitive by 2016′
http://www.environmentalleader.com/2013/03/12/cellulosic-ethanol-to-be-cost-competitive-by-2016/
March 12, 2013
Cellulosic ethanol is on track be cost competitive with corn-based ethanol by 2016, a development that could drive the fuel’s production, according to an industry survey conducted by Bloomberg New Energy Finance.
The survey focused on 11 major players in the cellulosic ethanol industry, all of which use a technique known as enzymatic hydrolysis to break down and convert the complex sugars in non-food crop matter, and a fermentation stage to turn the material into ethanol, BNEF said.
Cellulosic ethanol cost 94 cents a liter to produce in 2012, about 40 percent more than ethanol made from corn, BNEF said. That price gap will close by 2016, surveyed cellulosic ethanol producers predicted.
Project capital expenditures, feedstock and enzymes used in the production process are still the largest costs of running a cellulosic ethanol plant, the respondents said in the survey. But technology has pushed operating costs lower. For example, enzyme costs for a liter of cellulosic ethanol dropped 72 percent between 2008 and 2012 due to technological improvements, BNEF said.
Cellulosic ethanol producers will shift their focus from technology enhancements to logistical planning over the next five to 10 years in an effort to rein in capital costs, suggesting the industry is maturing, said BNEF’s lead biofuel analyst Harry Boyle.
Globally, there are 14 enzymatic hydrolysis pilots, nine demonstration-stage projects and 10 semi-commercial scale plants either announced, commissioned or due online shortly, according to the survey. Five of the semi-commercial plants are in the US and more are expected to open in Brazil in the near future, BNEF said. A semi-commercial facility with a capacity of 90 million liters per year requires an initial capital outlay of about $290 million.
By 2016, when second- and third-generation plants with capacities between 90m and 125m liters will be commissioned, initial capital costs per installed liter are expected to fall from $3 to $2 due to economies of scale and a reduction in over-engineering, BNEF said.
Meanwhile, some corn-based ethanol producers are struggling to maintain profits.
Some simple corn-based ethanol plants, which can only produce ethanol and distillers grains from corn, have temporarily shut down as production costs have exceeded revenue, according to a report released by the US Energy Information Agency. As of January 2013, the number of idled plants had grown to at least 20.
Profit margins at plants that can recover other products, such as corn oil, have been 15 cents to 20 cents per gallon higher than plants without that capability, the EIA said. Margins at plants without corn oil recovery have been negative (see graph), forcing plant shutdowns in Nebraska, Illinois and Minnesota.
March 12, 2013
Cellulosic ethanol is on track be cost competitive with corn-based ethanol by 2016, a development that could drive the fuel’s production, according to an industry survey conducted by Bloomberg New Energy Finance.
The survey focused on 11 major players in the cellulosic ethanol industry, all of which use a technique known as enzymatic hydrolysis to break down and convert the complex sugars in non-food crop matter, and a fermentation stage to turn the material into ethanol, BNEF said.
Cellulosic ethanol cost 94 cents a liter to produce in 2012, about 40 percent more than ethanol made from corn, BNEF said. That price gap will close by 2016, surveyed cellulosic ethanol producers predicted.
Project capital expenditures, feedstock and enzymes used in the production process are still the largest costs of running a cellulosic ethanol plant, the respondents said in the survey. But technology has pushed operating costs lower. For example, enzyme costs for a liter of cellulosic ethanol dropped 72 percent between 2008 and 2012 due to technological improvements, BNEF said.
Cellulosic ethanol producers will shift their focus from technology enhancements to logistical planning over the next five to 10 years in an effort to rein in capital costs, suggesting the industry is maturing, said BNEF’s lead biofuel analyst Harry Boyle.
Globally, there are 14 enzymatic hydrolysis pilots, nine demonstration-stage projects and 10 semi-commercial scale plants either announced, commissioned or due online shortly, according to the survey. Five of the semi-commercial plants are in the US and more are expected to open in Brazil in the near future, BNEF said. A semi-commercial facility with a capacity of 90 million liters per year requires an initial capital outlay of about $290 million.
By 2016, when second- and third-generation plants with capacities between 90m and 125m liters will be commissioned, initial capital costs per installed liter are expected to fall from $3 to $2 due to economies of scale and a reduction in over-engineering, BNEF said.
Meanwhile, some corn-based ethanol producers are struggling to maintain profits.
Some simple corn-based ethanol plants, which can only produce ethanol and distillers grains from corn, have temporarily shut down as production costs have exceeded revenue, according to a report released by the US Energy Information Agency. As of January 2013, the number of idled plants had grown to at least 20.
Profit margins at plants that can recover other products, such as corn oil, have been 15 cents to 20 cents per gallon higher than plants without that capability, the EIA said. Margins at plants without corn oil recovery have been negative (see graph), forcing plant shutdowns in Nebraska, Illinois and Minnesota.
Monday, March 11, 2013
LanzaTech Announces Datuk Ir. (Dr) Abdul Rahim Hj Hashim, President of Malaysian Gas Association, to Board of Directors
http://www.marketwatch.com/story/lanzatech-announces-datuk-ir-dr-abdul-rahim-hj-hashim-president-of-malaysian-gas-association-to-board-of-directors-2013-03-11
36 Year Veteran of Oil & Gas Industry Will Help Company Accelerate Commercialization of Novel Technology to Convert Unused Gas Streams Into Marketable Commodities
ROSELLE, IL, Mar 11, 2013 (MARKETWIRE via COMTEX) --
LanzaTech, a producer of low-carbon fuels and chemicals from
carbon-containing gases, announced the appointment of Datuk Ir. (Dr)
Abdul Rahim Hj Hashim, the current President of the Malaysian Gas
Association, former Chief Executive of PETRONAS Oil Refinery and a 36
year oil and gas industry veteran to its board of directors.
"As we take our technology further into the fuel production value
chain, Datuk Rahim's extensive leadership experience in the oil and
gas industry will be incredibly valuable," said Jennifer Holmgren,
CEO of LanzaTech. "In addition to the significant potential to create
marketable commodities from industrial waste streams containing
carbon monoxide, we are seeing increasing opportunity to leverage our
technology with underutilized, or otherwise unusable gas streams."
Datuk Rahim, the President of the Malaysian Gas Association, began
his career in PETRONAS soon after graduating from the University of
Birmingham, UK in electrical and electronics engineering. Throughout
his 36 years of involvement in the oil and gas industry, he has held
a number of high profile positions of increasing responsibility. As
Vice President at PETRONAS for 10 years, he covered three different
portfolios: Vice President of Human Resource Management for the
PETRONAS Group for four years; vice president of the Gas Business for
three years and Vice President for Research and Technology for three
years. In addition, Managing Director and Chief Executive Officer of
PETRONAS Oil Refinery (Melaka) Sdn Bhd as well as Managing Director
and Chief Executive Officer of Malaysian Refining Company Sdn Bhd
(MRC).
While serving in PETRONAS, he also held several key positions in a
variety of gas industry organizations, both in Malaysia and at an
international level including serving as President of the Asia
Pacific Natural Gas Vehicle Association (ANGVA) and President of the
International Gas Union (IGU). A professional engineer, Datuk Rahim
serves on the Board of Engineers (BOE), Malaysia and also the
Chairman of the Engineering Accreditation Council (EAC) Malaysia. He
is also an Associate Member of the American Institute of Chemical
Engineers. In 1997, he completed the Advanced Management Program at
Harvard Business School.
"I've been very impressed with the progress LanzaTech has made to
date developing and scaling its core technology to convert waste
gases into renewable fuels and chemicals," said Datuk Rahim. "I look
forward to helping the company extend that platform into new
feedstocks, including CO2, methane and other carbon sources as well
as new end products."
In 2012, LanzaTech partnered with PETRONAS to develop new approaches
to effectively capture carbon, with an initial focus on using CO2
from a variety of sources including refinery off gases and natural
gas wells to produce acetic acid, a high value chemical with
applications in the polymers and plastics markets.
About LanzaTech
LanzaTech is a leader in gas fermentation technology. It provides
novel and economic routes to fuels and high value chemicals from
waste gas streams. LanzaTech's unique process provides a sustainable
pathway to produce platform chemicals that serve as building blocks
to products that have become indispensable in our lives such as
rubber, plastics, synthetic fibers and fuels.
LanzaTech's technology solutions mitigate carbon emissions from
industry without impacting adversely food or land security.
Currently commissioning a second pre-commercial facility in China
using steel mill off gases for ethanol production, LanzaTech, a
company founded in New Zealand, is now a global organization with
full commercial operation targeted for 2014.
More information is
available at www.lanzatech.com
Tuesday, February 26, 2013
EPA approves new cellulosic, advanced biofuel pathways
http://www.biomassmagazine.com/articles/8669/epa-approves-new-cellulosic-advanced-biofuel-pathways
The
U.S. EPA has published a new final rule, qualifying additional fuel
pathways under the renewable fuel standard (RFS) for advanced biofuel,
cellulosic biofuel and biomass-based diesel. The rulemaking covers two
new feedstocks, camelina and energy cane. It also qualifies renewable
gasoline and renewable gasoline blendstocks made from certain feedstocks
as cellulosic biofuel.
Under the new rule, ethanol, renewable diesel (including jet fuel and heating oil) and renewable gasoline blendstock produced using energy cane feedstock can now qualify to generate cellulosic biofuel renewable identification numbers (RINs).
According to the EPA, for the purposes of this rulemaking, energy cane has been defined as a complex hybrid in the Saccharum genus that that has been bred to maximize cellulosic rather than sugar content.
Within the final rule, the EPA addresses several comments made by members of the public during the rulemaking process, including those related to invasiveness and land use change potential. The EPA states that energy cane does not raise significant concerns about the threat of invasiveness. Regarding land use change, the EPA specifies that energy cane is most likely to be grown on land once used for pasture, rice, commercial sod, cotton or alfalfa, which would have a less international direct impact than switchgrass because those commodities are not as widely traded as soybeans or wheat. “Given that energy cane will likely displace the least productive land first, EPA concludes that the land use GHG impact for energy cane per gallon should be no greater and likely less than estimated for switchgrass,” said the agency in the rulemaking.
According to the rule, EPA believes that cellulsoic biofuels produced from the cellulose, hemicellulose and lignin portions of energy cane will have similar or better lifecycle GHG impacts than biofuel produced from switchgrass.
Biodiesel and renewable diesel (including jet fuel and heating oil) made from camelina feedstock are now eligible for biomass-based diesel or advanced RINs. In addition, camelina-based naphtha and liquefied petroleum gas can qualify for advanced biofuel RINs.
While the EPA notes in the rulemaking that some parties submitting comments on the proposed camelina pathways expressed concern over the potential threat of invasiveness, the EPA states that it believes the production of camelina is unlikely to spread beyond the intended borders in which it is grown.
The EPA also specified that the crop is currently being grown on approximately 50,000 acres of land throughout Montana, Washington, North Dakota and South Dakota. Overall, the EPA estimates that approximately 9 million acres of land in a wheat/fallow rotation is available for camelina production nationwide.
“Current information suggestion that camelina will be produced on land that would otherwise remain fallow,” said EPA in the rulemaking. “Therefore, increased production of camelina-based renewable fuel is not expected to result in significant land use change emissions; however, the agency will continue to monitor volumes through EMTS to verify this assumption.”
Regarding renewable gasoline and renewable gasoline blendstocks, the rulemaking qualifies fuels produced from crop residue, slash, pre-commercial thinnings, tree residue, annual cover crops, and cellulosic components of separated yard waste, separated food waste and separated municipal solid waste (MWS). The rule also specifies that, when utilizing natural gas, biogas and/or biomass as the only process energy source, thermochemical pyrolysis, thermochemical gasification, biochemical direct fermentation, biochemical fermentation with catalytic upgrading can all be used with the listed feedstocks to generated fuel qualifying as cellulosic biofuel. In addition, any other process that uses biogas and/or biomass as the only process energy sources to convert the approved gasoline and renewable gasoline blendstock feedstocks into biofuel also qualifies for cellulosic RINs.
A full copy of the rulemaking is available on the EPA website.
By Erin Voegele | February 26, 2013
Under the new rule, ethanol, renewable diesel (including jet fuel and heating oil) and renewable gasoline blendstock produced using energy cane feedstock can now qualify to generate cellulosic biofuel renewable identification numbers (RINs).
According to the EPA, for the purposes of this rulemaking, energy cane has been defined as a complex hybrid in the Saccharum genus that that has been bred to maximize cellulosic rather than sugar content.
Within the final rule, the EPA addresses several comments made by members of the public during the rulemaking process, including those related to invasiveness and land use change potential. The EPA states that energy cane does not raise significant concerns about the threat of invasiveness. Regarding land use change, the EPA specifies that energy cane is most likely to be grown on land once used for pasture, rice, commercial sod, cotton or alfalfa, which would have a less international direct impact than switchgrass because those commodities are not as widely traded as soybeans or wheat. “Given that energy cane will likely displace the least productive land first, EPA concludes that the land use GHG impact for energy cane per gallon should be no greater and likely less than estimated for switchgrass,” said the agency in the rulemaking.
According to the rule, EPA believes that cellulsoic biofuels produced from the cellulose, hemicellulose and lignin portions of energy cane will have similar or better lifecycle GHG impacts than biofuel produced from switchgrass.
Biodiesel and renewable diesel (including jet fuel and heating oil) made from camelina feedstock are now eligible for biomass-based diesel or advanced RINs. In addition, camelina-based naphtha and liquefied petroleum gas can qualify for advanced biofuel RINs.
While the EPA notes in the rulemaking that some parties submitting comments on the proposed camelina pathways expressed concern over the potential threat of invasiveness, the EPA states that it believes the production of camelina is unlikely to spread beyond the intended borders in which it is grown.
The EPA also specified that the crop is currently being grown on approximately 50,000 acres of land throughout Montana, Washington, North Dakota and South Dakota. Overall, the EPA estimates that approximately 9 million acres of land in a wheat/fallow rotation is available for camelina production nationwide.
“Current information suggestion that camelina will be produced on land that would otherwise remain fallow,” said EPA in the rulemaking. “Therefore, increased production of camelina-based renewable fuel is not expected to result in significant land use change emissions; however, the agency will continue to monitor volumes through EMTS to verify this assumption.”
Regarding renewable gasoline and renewable gasoline blendstocks, the rulemaking qualifies fuels produced from crop residue, slash, pre-commercial thinnings, tree residue, annual cover crops, and cellulosic components of separated yard waste, separated food waste and separated municipal solid waste (MWS). The rule also specifies that, when utilizing natural gas, biogas and/or biomass as the only process energy source, thermochemical pyrolysis, thermochemical gasification, biochemical direct fermentation, biochemical fermentation with catalytic upgrading can all be used with the listed feedstocks to generated fuel qualifying as cellulosic biofuel. In addition, any other process that uses biogas and/or biomass as the only process energy sources to convert the approved gasoline and renewable gasoline blendstock feedstocks into biofuel also qualifies for cellulosic RINs.
A full copy of the rulemaking is available on the EPA website.
Labels:
biodiesel,
carbon,
cellulosic ethanol,
cellulosic gasoline,
energy grass,
environment,
EPA,
gasification,
jet fuel,
natural gas,
policy,
public,
RFS,
technology,
wastes,
woody biomass
Monday, February 18, 2013
The Compression Spread
Jim Lane
|
February 8, 2013
You’ve heard about the crack spread, and the crush spread — as means to value oil refining and crop refining.
Let’s think about biomass densification and compression, and in that context, a little about KiOR.
You might have heard a little or a lot about KiOR — which is currently commissioning its first commercial-scale (11 million gallon) biofuels plant in Columbus, Mississippi.Now, the oil industry might, via the American Petroleum Institute, be currently talking down the validity of the Renewable Fuel Standard — but it is not entirely clear that KIOR would have found the financing that it did without the EISA Act galvanizing investors into action.
KiOR’s secret sauce
Now, it is getting more clear — among all the glittering pieces of technology that the biofuels industry has developed — that the oil refining and marketing sector would really, really like to have invented KiOR’s BFCC unit — KiOR’s secret sauce.
What is a BFCC? It is a fluidized-bed catalytic cracker that works with biomass (in KiOR’s case, they are working now with southern yellow pine they expect to obtain at $72 per bone-dry ton).
Why is it coveted? It takes biomass, which has low density, and liquifies it into an intermediate with very high energy density — and does so at a transformatively low cost. That intermediate can be hydrotreated into an in-spec drop-in fuel — either in the gasoline range, or diesel, or even jet.
Why is that important? Because it is expected to be available at a lower cost than the marginal cost of oil production — when taken to an appropriate scale.
Equally importantly — because it is produced from renewable biomass — it can help de-carbonize an atmosphere that is producing increasingly wacky weather.
The marginal cost of producing oil
In a world where oil prices are highly volatile, one statistic for price prediction has held true for a long time — and that it is averaged cost of marginal production of oil for the world’s 50 largest public oil companies.
What exactly does ” the marginal cost of production” mean? It is the cost of exploring and capturing the last barrel of oil needed to meet overall global demand.
Bernstein Research circulated a note last year estimating that the marginal cost of production (for the top 50 public companies — note that some national oilcos have very different cost structures) increased by 229 percent between 2001 and 2010. Meanwhile, oil prices increased by 228%. Eureka — a driver of long-term oil prices.
It stands to reason. If the oil price falls below the marginal cost of production – production stalls until the price rises. That’s simple economics.
All that lovely Bakken crude
Further, it is not as easy as many suppose to disrupt that price with, for example, an explosion of oil production in the Bakken oilfields of North Dakota or the tar sands of western Canada. Bakken crude sells at a very deep discount, already, to Brent Crude — the spread has exceeded $30 per barrel at times.
That’s because of the lack of pipeline and railcar capacity to move it to international markets.
Which brings us back to KiOR — and the possibility that, long-term, the future of the company may focus less on building complete field–to-wheels fuel capacity via hydrotreating intermediates onsite, at its own facilities.
It has a future — perhaps a very big one— not so much as a supplier of finished fuels to its own customer base of fuel buyers, but as a supplier of crude-equivalent feedstocks to existing refinery infrastructure.
That’s where that $92 a barrel becomes important — not the $100-$115 retail value of the barrel, but the production cost of that barrel.
Recovering prehistoric algae as an energy business
You see, at the end of the day what you get from punching holes in the ground (i.e. oil exploration) is a well tapping into some prehistoric algae which — over 60 million years or so — has been transformed by Nature into crude petroleum and natural gas.
Nature made the biomass for free — via its own cocktails of carbon dioxide, water, and trace nutrients. Then, Nature conveniently densified the biomass for free, too. What we pay for is the harvest — it’s the energy equivalent of hunter-gatherer.
With a barrel of oil, you get around 5.8 million BTUs. That’s around $15.86 per million BTUs for the marginal cost of production.
In the case of KiOR, you have to pay for the biomass — the aforementioned $72 for each bone-dry ton. In that ton, you start with 14-20 million BTUs. So, you are paying $3.60-$5.14 per million BTUs for the wood.
The problem is, you can’t burn wood in a car engine — and even if you could, you think range anxiety for battery-electric vehicles is bad. Sheesh!
So, here’s the challenge, and here’s the prize, and a caveat.
Challenge? Densify the wood biomass into a crude-equivalent refinery feedstock for less than $12.72 per ton of biomass, including your operating and capital costs and your cost of capital.
Prize? Well, the International Energy Agency expects that energy demand will rise some 50 percent over the next 25 years — rising demand that you can serve.
Caveat? Lowest-cost producer wins. No one is likely to buy your $92 per barrel intermediate if there’s a $90 barrel available.
Catalytic fast pyrolysis
Where does this all lead us? In the case of making crude-equivalent intermediates — catalytic fast pyrolysis has emerged, of late, as the lowest-cost path towards answering that challenge. It is not entirely clear this class of technologies will actually reach scale — and reach the targeted costs — and find boatloads of affordable capital any time soon. But the signs are quite encouraging.
Catalytic fast pyrolysis — that’s what KiOR does. That’s why so many people watch their development with such attention. Why there is such an intense interest in their progress that media have been snooping around the plants, trying to get information on production prior to the company’s quarterly earnings call (earnings are expected to be reported March 25, according to NASDAQ).
Other paths to biofuels heaven
Nor is it entirely certain that crude-equivalent intermediates are the only viable path to market. For instance — there is the entire class of alcohol fuels, which are controversial in the US and the EU because of infrastructure issues, but are well-established in Brazil.
Crude-equivalent intermediates certainly are attractive — if one of your goals is to avoid finding out how much the oil & gas industry is willing to spend to send you to the devil, if you come up with a technological path to affordable meeting transportation fuel demand that doesn’t pass through oil refineries.
The oil industry’s anguish over alcohols is as profound as the Prohibition Party’s anguish used to be.
Back to KiOR
So — that brings us back to KiOR, and its prospects. We’ll know quite a lot more on the next earnings call. For now, they are in the business of making finished fuels and earning revenues from RINs and fuel sales.
For sure, right now they are proving the validity of their process to investors. One might speculate that they are also surrounding their IP — their secret sauce — with a complete path to market so that never become the captive of a refiner & marketer who can form a barrier to entry between their crude and the downstream gas station. With ethanol producers we have seen, ahem, where that can lead.
Long-term — we don’t see a process that can turn that much southern yellow pine (and other biomass, down the line) into sub-$92 crude-equivalent intermediates having a market cap of $584 million, as KiOR has today. If the technology does not work out — well, it’s not very valuable, is it? But if it does work out – as sports broadcaster Keith Jackson used to say “Whoa, Nelly!”.
Why? Looked at it as a technology that converts resources into proved reserves (valued at, say, $20 per barrel, or the spread between Brent crude and the marginal cost of production) – KiOR is valued at around 29 million barrels of oil. That’s the volume of oil you get from converting 400,000 tons of wood into oil refining intermediates.
But there’s a lot more wood out there.
The above-ground oil field a/k/a the US wood basket
The US Department of Energy, in their Billion Ton update study in 2011, estimated that there would be 120 million tons of wood biomass available, per year, at $80 per ton, that could be sustainably used for bioenergy. The figure declines to around 85 million tons at $40 per ton.
That’s a big spread.
So — in all things biofuel – keep that cost of densification very much in your mind.
The Compression Spread
In traditional oil and agricultural economics, we think about the the cost of liberating a known molecule. In the new bioenergy — getting biomass sufficiently densified, via technology instead of Nature — may open the door to ultra low-cost feedstocks and some amazing upside value for the liberators and their inventions.
That’s the compression spread.
Friday, February 8, 2013
Georgia Southern University center opens pilot pellet mill
http://www.biomassmagazine.com/articles/8620/georgia-southern-university-center-opens-pilot-pellet-mill
Georgia
Southern University’s Herty Advanced Materials Development Center has
opened the first fully-integrated pilot pellet mill in the United
States. The new production line, located in Savannah, Ga., includes a
nearly $2 million investment in process equipment. The facility will
provide a much-needed platform for innovation in process technology and
pellet design in the U.S. and will help rising global demand for biomass
pellets in Europe and North America.
With the introduction of the new mill, Herty will work with technology providers and developers to help validate a number of product development projects. The team will also support researchers working to enhance pellet design and will develop methods for lowering operating costs.
Pellets, formed from wood and bioenergy feedstocks such as miscanthus and switch grass, are highly regarded as an effective, alternative energy solution because of their relatively high energy density and ease of handling. Pellets can also be easily integrated into existing electric power generating plants as a fuel. As a result, the pellet industry has witnessed tremendous growth as major European countries, which have adopted mandates for greenhouse gas emissions, are using biomass pellets at unprecedented rates. Most of the growth in Europe has come from imports.
According to a recent report from the U.S. International Trade Commission, annual global imports of wood pellets have grown from virtually zero to more than $1.5 billion during the last decade.
However, research into improving the production of pellets, as well as optimizing pellet operation and composition has lagged behind industry growth. Developers, manufacturers and researchers will now be able to benefit by having a flexible, integrated production facility that can produce pellets with properties that are consistent with those achieved in large-scale commercial facilities.
“For more than 75 years, Herty has been helping companies in a variety of industries develop and validate new processes and products,” said Alex Koukoulas, Ph.D., president and chief executive officer of Georgia Southern’s Herty Advanced Materials Development Center. “This new pilot mill is a first and will help address a global need. The new mill will serve as a valuable testbed by helping our clients confirm product performance and operating efficiencies and before they commit to an investment in full-scale manufacturing. Ultimately, the Savannah-based facility will help companies lower technical risk and accelerate delivery."
“To be a part of a larger mandate, assisting in clean energy solutions, promoting a cleaner environment and impacting Georgia’s economic growth makes our efforts here at Herty all the more meaningful,” said Jill Stuckey, director, biomass development. Herty’s pellet mill and production facility provides access to both advanced technology and to new product development capabilities and support.
Capabilities and services include:
- Biomass preparation and pretreatment
- Biomass testing
- Pellet analysis
By Georgia Southern University | February 08, 2013
With the introduction of the new mill, Herty will work with technology providers and developers to help validate a number of product development projects. The team will also support researchers working to enhance pellet design and will develop methods for lowering operating costs.
Pellets, formed from wood and bioenergy feedstocks such as miscanthus and switch grass, are highly regarded as an effective, alternative energy solution because of their relatively high energy density and ease of handling. Pellets can also be easily integrated into existing electric power generating plants as a fuel. As a result, the pellet industry has witnessed tremendous growth as major European countries, which have adopted mandates for greenhouse gas emissions, are using biomass pellets at unprecedented rates. Most of the growth in Europe has come from imports.
According to a recent report from the U.S. International Trade Commission, annual global imports of wood pellets have grown from virtually zero to more than $1.5 billion during the last decade.
However, research into improving the production of pellets, as well as optimizing pellet operation and composition has lagged behind industry growth. Developers, manufacturers and researchers will now be able to benefit by having a flexible, integrated production facility that can produce pellets with properties that are consistent with those achieved in large-scale commercial facilities.
“For more than 75 years, Herty has been helping companies in a variety of industries develop and validate new processes and products,” said Alex Koukoulas, Ph.D., president and chief executive officer of Georgia Southern’s Herty Advanced Materials Development Center. “This new pilot mill is a first and will help address a global need. The new mill will serve as a valuable testbed by helping our clients confirm product performance and operating efficiencies and before they commit to an investment in full-scale manufacturing. Ultimately, the Savannah-based facility will help companies lower technical risk and accelerate delivery."
“To be a part of a larger mandate, assisting in clean energy solutions, promoting a cleaner environment and impacting Georgia’s economic growth makes our efforts here at Herty all the more meaningful,” said Jill Stuckey, director, biomass development. Herty’s pellet mill and production facility provides access to both advanced technology and to new product development capabilities and support.
Capabilities and services include:
- Biomass preparation and pretreatment
- Biomass testing
- Pellet analysis
Thursday, January 31, 2013
Ethanol industry credits new technology for cellulosic breakthrough, less reliance on corn
http://www.startribune.com/nation/189153701.html?page=all&prepage=2&c=y#continue
Article by: DAVID PITT , Associated Press
Updated: January 31, 2013 - 2:17 AM
Article by: DAVID PITT , Associated Press
Updated: January 31, 2013 - 2:17 AM
DES MOINES, Iowa
- After decades of talk, the ethanol industry is building
multimillion dollar refineries in several states that will use corn
plant residue, wood scraps and even garbage to produce the fuel
additive.
The breakthrough comes at a key time for the industry, after the drought heightened criticism about the vast amount of corn used to brew up ethanol rather than be transformed into animal feed or other foods. The corn crop already was smaller than expected because of drought last year, and livestock groups were especially critical of how 40 percent of the crop being diverted toward ethanol caused corn prices to soar.
The new cellulosic ethanol technology could quiet that criticism while also making use of material largely seen as worthless.
Experts said it hasn't been easy.
"You're fighting against millions, perhaps hundreds of millions of years of evolution and that's sort of the secular equivalent of going against the word of God," said C. Ford Runge, a University of Minnesota professor of applied economics and law.
Making ethanol from corn is relatively simple, as kernels are cracked and fermented. But to produce ethanol from the woody and fibrous parts of plants, scientists had to figure out a way to break lignin — the tough fibers that plants have developed through evolution to make stems, trees and corn stalks stiff — from the cellulose. They must then extract the plant's sugars and convert them into ethanol.
Efforts to make that leap have made for a punch line in the industry since the 1980s. Cellulosic ethanol, everyone would say, is just a few years away.
But high oil prices eventually drove companies to spend more on research and development. The government jumped in too. The 2008 farm bill provided $1 billion in financial incentives to encourage cellulosic development.
"You cannot underestimate the impact on the world of $80- or $90- or even $100-a-barrel oil," said Monte Shaw, executive director of trade group Iowa Renewable Fuels Association.
Oil futures first reached $100 a barrel in January 2008, marking a quadrupling of price in five years since 2003. Oil trades now at around $95 a barrel.
The push for more ethanol production comes amid federal requirements that the petroleum industry mix 36 billion gallons of the additive into the nation's fuel supply by 2022.
The Environmental Protection Agency has required that 16 billion gallons of that ethanol be cellulosic, providing another incentive for companies to pursue cellulosic research. Only about 25,000 gallons of cellulosic ethanol were produced last year, but 10 million gallons are expected in 2013.
"Suddenly technological development started to occur," said Adam Monroe, president of Novozymes North America, which makes enzymes used in cellulosic production.
Scientists found enzymes that more efficiently break down the plant material and better yeast strains to convert sugars to alcohol, clearing the way for cellulosic production.
About 70 cellulosic projects are under way, reflecting billions of dollars of private investment.
In Iowa, the nation's leading corn producer, two cellulosic plants are under construction that will use corn plant leaves, stalks and cobs known as corn stover.
Near Nevada, a small Iowa farming community about 40 miles north of Des Moines, DuPont is building a $200 million factory that when completed in 2014 will be the nation's largest cellulosic ethanol plant, capable of making 30 million gallons a year.
Scientists said it's a major step forward.
"We had lab experiments. That's all we had five years ago," said Jan Koninckx, a chemical engineer and DuPont's global business director for biofuels.
The DuPont plant will work with 500 local farmers to collect more than 375,000 tons of corn stover annually.
In northwest Iowa, two companies are teaming up to build another corn stover plant producing 25 million gallons of ethanol annually. Sioux Falls, S.D.-based ethanol-maker POET and Royal DSM, a biotechnology company based in the Netherlands, are building the $250 million plant in Emmetsburg.
Other cellulosic plants are under construction in Kansas, Michigan and Mississippi. Plants in Georgia and Nevada will convert garbage into ethanol in commercial-size plants. One in Florida will convert yard waste and other plant material from a nearby landfill to the fuel additive.
Other projects are testing the feasibility of making ethanol from fast-growing trees and various grasses.
If cellulosic production can ease the demand for corn, the change will be welcomed by livestock producers who have been infuriated by rising feed costs.
"The bottom line is it's all about the competition for corn," said J.D. Alexander, a cattle feeder and corn producer from Pilger, Neb., who is president of the National Cattlemen's Beef Association.
The ethanol industry said millions of gallons of cellulosic ethanol should begin flowing this year and rapidly increase over the next few years.
The breakthrough comes at a key time for the industry, after the drought heightened criticism about the vast amount of corn used to brew up ethanol rather than be transformed into animal feed or other foods. The corn crop already was smaller than expected because of drought last year, and livestock groups were especially critical of how 40 percent of the crop being diverted toward ethanol caused corn prices to soar.
The new cellulosic ethanol technology could quiet that criticism while also making use of material largely seen as worthless.
Experts said it hasn't been easy.
"You're fighting against millions, perhaps hundreds of millions of years of evolution and that's sort of the secular equivalent of going against the word of God," said C. Ford Runge, a University of Minnesota professor of applied economics and law.
Making ethanol from corn is relatively simple, as kernels are cracked and fermented. But to produce ethanol from the woody and fibrous parts of plants, scientists had to figure out a way to break lignin — the tough fibers that plants have developed through evolution to make stems, trees and corn stalks stiff — from the cellulose. They must then extract the plant's sugars and convert them into ethanol.
Efforts to make that leap have made for a punch line in the industry since the 1980s. Cellulosic ethanol, everyone would say, is just a few years away.
But high oil prices eventually drove companies to spend more on research and development. The government jumped in too. The 2008 farm bill provided $1 billion in financial incentives to encourage cellulosic development.
"You cannot underestimate the impact on the world of $80- or $90- or even $100-a-barrel oil," said Monte Shaw, executive director of trade group Iowa Renewable Fuels Association.
Oil futures first reached $100 a barrel in January 2008, marking a quadrupling of price in five years since 2003. Oil trades now at around $95 a barrel.
The push for more ethanol production comes amid federal requirements that the petroleum industry mix 36 billion gallons of the additive into the nation's fuel supply by 2022.
The Environmental Protection Agency has required that 16 billion gallons of that ethanol be cellulosic, providing another incentive for companies to pursue cellulosic research. Only about 25,000 gallons of cellulosic ethanol were produced last year, but 10 million gallons are expected in 2013.
"Suddenly technological development started to occur," said Adam Monroe, president of Novozymes North America, which makes enzymes used in cellulosic production.
Scientists found enzymes that more efficiently break down the plant material and better yeast strains to convert sugars to alcohol, clearing the way for cellulosic production.
About 70 cellulosic projects are under way, reflecting billions of dollars of private investment.
In Iowa, the nation's leading corn producer, two cellulosic plants are under construction that will use corn plant leaves, stalks and cobs known as corn stover.
Near Nevada, a small Iowa farming community about 40 miles north of Des Moines, DuPont is building a $200 million factory that when completed in 2014 will be the nation's largest cellulosic ethanol plant, capable of making 30 million gallons a year.
Scientists said it's a major step forward.
"We had lab experiments. That's all we had five years ago," said Jan Koninckx, a chemical engineer and DuPont's global business director for biofuels.
The DuPont plant will work with 500 local farmers to collect more than 375,000 tons of corn stover annually.
In northwest Iowa, two companies are teaming up to build another corn stover plant producing 25 million gallons of ethanol annually. Sioux Falls, S.D.-based ethanol-maker POET and Royal DSM, a biotechnology company based in the Netherlands, are building the $250 million plant in Emmetsburg.
Other cellulosic plants are under construction in Kansas, Michigan and Mississippi. Plants in Georgia and Nevada will convert garbage into ethanol in commercial-size plants. One in Florida will convert yard waste and other plant material from a nearby landfill to the fuel additive.
Other projects are testing the feasibility of making ethanol from fast-growing trees and various grasses.
If cellulosic production can ease the demand for corn, the change will be welcomed by livestock producers who have been infuriated by rising feed costs.
"The bottom line is it's all about the competition for corn," said J.D. Alexander, a cattle feeder and corn producer from Pilger, Neb., who is president of the National Cattlemen's Beef Association.
The ethanol industry said millions of gallons of cellulosic ethanol should begin flowing this year and rapidly increase over the next few years.
Wade Robey, a board member at POET-DSM Advanced Biofuels, said the companies are confident the new plants will be profitable.
"We feel very strongly this is a good business to be in and a good investment for our companies," he said.
Some companies, including DuPont and Abengoa, acknowledged they are already looking at sites for more cellulosic plants.
"We feel very strongly this is a good business to be in and a good investment for our companies," he said.
Some companies, including DuPont and Abengoa, acknowledged they are already looking at sites for more cellulosic plants.
Monday, January 28, 2013
LSU AgCenter Commissions Advanced Biofuels Pilot Plant
http://www.biofuelsjournal.com/info/bf_articles.html?ID=129936
Date Posted: January 28, 2013
Date Posted: January 28, 2013
St. Gabriel, LA—The fledgling biofuels and bioprocessing
industry in the South took a step forward Friday, Jan. 25, with the
formal commissioning of a pilot plant at the LSU AgCenter Audubon Sugar Institute.
This indicates success in several areas, said LSU AgCenter Vice Chancellor John Russin.
The infusion of federal funding will benefit the state and the sugar industry as well as the biofuels and bioprocessing industry and the rural economy, Russin said.
“This is an amalgam of a true team effort.”
The pilot plant is part of a larger project funded by a five-year, $17.2 million grant from the U.S. Department of Agriculture’s National Institute of Food and Agriculture through its agriculture and food research initiative, said William Goldner, national program leader for sustainable bioenergy in the USDA Institute of Bioenergy, Climate and Environment.
The grant came as a result of a competitive peer review of proposals to create regional systems for sustainable production of biofuels and biobased products, Goldner said.
“We want to enhance existing agriculture and improve opportunities for rural communities.”
Dedicated to producing biofuels and biochemicals from agricultural crops and byproducts, the pilot plant is the centerpiece of the AgCenter’s Sustainable Bioproducts Initiative, said AgCenter project director Vadim Kochergin.
It will focus on processing sweet sorghum, energy cane and other grassy feedstocks into convertible sugars, fiber and bioproducts for further refining into butanol, gasoline, isoprene and biochemicals, he said.
The pilot plant is a scaled-down version of a typical sugar mill, said Juan Miguel Bueno, president and CEO of Manufacturera 3M, S.A. de C.V. in Cordoba, Mexico.
Bueno’s company fabricates sugar mills used in Louisiana, so his challenge was to design and produce the pilot plant.
“It’s exactly the same as a big mill but on a smaller scale,” Bueno said of the project that took about five months to engineer and manufacture.
“By developing new things, we can produce new energy and new resources,” he said.
The pilot plant is seen as a milestone for the project that Kochergin described as a “work in progress.”
“The facility can be scaled up to any capacity,” Kochergin said. “The focus is on primary processing of sweet sorghum, energy cane and other grassy feedstocks.
"We can facilitate projects targeting evaluation and validation of technologies as well as training of research and operating personnel.”
“This is a tremendous opportunity to identify potential feedstocks, not only for Louisiana but all of the South,” said Carrie Castille, associate commissioner for government affairs and science advisor in the Louisiana Department of Agriculture and Forestry.
“This project will provide long-term, lifecycle assessment for continued crop production with respect to weather,” Castille said.
Louisiana is in a unique position for feedstock production, and lifecycle assessment will provide information on how various crops perform during different weather patterns, such as drought.
“The benefits this facility will give to Louisiana landowners is forward thinking,” said Klein Kirby, chairman of A. Wilbert’s Sons, LLC, a leading Louisiana land development company.
“This is a huge tool for the Louisiana sugar industry, for the processors and for the landowners,” Kirby said.
For more information, call 225-578-5839.
This indicates success in several areas, said LSU AgCenter Vice Chancellor John Russin.
The infusion of federal funding will benefit the state and the sugar industry as well as the biofuels and bioprocessing industry and the rural economy, Russin said.
“This is an amalgam of a true team effort.”
The pilot plant is part of a larger project funded by a five-year, $17.2 million grant from the U.S. Department of Agriculture’s National Institute of Food and Agriculture through its agriculture and food research initiative, said William Goldner, national program leader for sustainable bioenergy in the USDA Institute of Bioenergy, Climate and Environment.
The grant came as a result of a competitive peer review of proposals to create regional systems for sustainable production of biofuels and biobased products, Goldner said.
“We want to enhance existing agriculture and improve opportunities for rural communities.”
Dedicated to producing biofuels and biochemicals from agricultural crops and byproducts, the pilot plant is the centerpiece of the AgCenter’s Sustainable Bioproducts Initiative, said AgCenter project director Vadim Kochergin.
It will focus on processing sweet sorghum, energy cane and other grassy feedstocks into convertible sugars, fiber and bioproducts for further refining into butanol, gasoline, isoprene and biochemicals, he said.
The pilot plant is a scaled-down version of a typical sugar mill, said Juan Miguel Bueno, president and CEO of Manufacturera 3M, S.A. de C.V. in Cordoba, Mexico.
Bueno’s company fabricates sugar mills used in Louisiana, so his challenge was to design and produce the pilot plant.
“It’s exactly the same as a big mill but on a smaller scale,” Bueno said of the project that took about five months to engineer and manufacture.
“By developing new things, we can produce new energy and new resources,” he said.
The pilot plant is seen as a milestone for the project that Kochergin described as a “work in progress.”
“The facility can be scaled up to any capacity,” Kochergin said. “The focus is on primary processing of sweet sorghum, energy cane and other grassy feedstocks.
"We can facilitate projects targeting evaluation and validation of technologies as well as training of research and operating personnel.”
“This is a tremendous opportunity to identify potential feedstocks, not only for Louisiana but all of the South,” said Carrie Castille, associate commissioner for government affairs and science advisor in the Louisiana Department of Agriculture and Forestry.
“This project will provide long-term, lifecycle assessment for continued crop production with respect to weather,” Castille said.
Louisiana is in a unique position for feedstock production, and lifecycle assessment will provide information on how various crops perform during different weather patterns, such as drought.
“The benefits this facility will give to Louisiana landowners is forward thinking,” said Klein Kirby, chairman of A. Wilbert’s Sons, LLC, a leading Louisiana land development company.
“This is a huge tool for the Louisiana sugar industry, for the processors and for the landowners,” Kirby said.
For more information, call 225-578-5839.
Labels:
biomass,
cellulosic ethanol,
chemicals,
energy grass,
environment,
industry,
landowners,
local communities,
Louisiana,
research,
rural development,
southeastern US,
technology,
USDA
Friday, January 25, 2013
DC Circuit Court Issues Narrow, Mixed Decision on Cellulosic Biofuel Standard
http://www.biofuelsjournal.com/info/bf_articles.html?ID=129885
Date Posted: January 25, 2013
Date Posted: January 25, 2013
Washington, DC—The D.C. Circuit issued Jan. 25 a narrow, but
mixed decision, vacating the 2012 cellulosic biofuel standard and
affirming the 2012 advanced biofuel standard.
Reacting to that decision, leading organizations representing biofuel producers--who had intervened in the litigation to defend the rulemaking--noted that although the court vacated the cellulosic standard, it also rejected API’s argument that EPA was required to follow the US Energy Information Administration’s projections in setting its own.
Similarly, the court rejected API’s argument that EPA was not entitled to consider information from cellulosic biofuel producers in setting its projection, finding that cellulosic producers were, of course, an “almost inevitable source of information” for EPA.
According to the biofuel organizations, these were important decisions that give EPA flexibility in setting cellulosic biofuel volumes in the future.
Nonetheless, the court vacated the cellulosic biofuel standard because it believed that EPA had impermissibly set the volume with the objective of promoting growth in the industry, rather than simply making an accurate prediction.
The biofuels organizations strongly disagree with the court’s characterization of what EPA did -- EPA did not determine a reasonably achievable volume and then inflate it, rather it set the volume based on the best information available to it at the time.
Regardless, under the D.C. Circuit’s decision, EPA is free to reinstate the volumes that it had established, as long as the information available at the time would support the agency’s conclusion that those volumes were reasonably achievable.
The court’s decision does not now require, or permit, EPA to set volumes based on hindsight.
The D.C. Circuit also affirmed the EPA’s decision not to reduce the advanced biofuel volume, categorically rejecting API’s arguments that EPA must support its decision not to reduce the applicable volume of advanced biofuels with specific numerical projections.
In a joint statement, the biofuel organization stated that “although we disagree with the court’s decision vacating the 2012 cellulosic volumes, today’s decision once again rejects broad-brushed attempts to effectively roll back the federal Renewable Fuel Standard.”
The intervenor biofuel organizations are reviewing the court’s decision and assessing next steps in the matter.
For more information, call 202-545-4000.
Reacting to that decision, leading organizations representing biofuel producers--who had intervened in the litigation to defend the rulemaking--noted that although the court vacated the cellulosic standard, it also rejected API’s argument that EPA was required to follow the US Energy Information Administration’s projections in setting its own.
Similarly, the court rejected API’s argument that EPA was not entitled to consider information from cellulosic biofuel producers in setting its projection, finding that cellulosic producers were, of course, an “almost inevitable source of information” for EPA.
According to the biofuel organizations, these were important decisions that give EPA flexibility in setting cellulosic biofuel volumes in the future.
Nonetheless, the court vacated the cellulosic biofuel standard because it believed that EPA had impermissibly set the volume with the objective of promoting growth in the industry, rather than simply making an accurate prediction.
The biofuels organizations strongly disagree with the court’s characterization of what EPA did -- EPA did not determine a reasonably achievable volume and then inflate it, rather it set the volume based on the best information available to it at the time.
Regardless, under the D.C. Circuit’s decision, EPA is free to reinstate the volumes that it had established, as long as the information available at the time would support the agency’s conclusion that those volumes were reasonably achievable.
The court’s decision does not now require, or permit, EPA to set volumes based on hindsight.
The D.C. Circuit also affirmed the EPA’s decision not to reduce the advanced biofuel volume, categorically rejecting API’s arguments that EPA must support its decision not to reduce the applicable volume of advanced biofuels with specific numerical projections.
In a joint statement, the biofuel organization stated that “although we disagree with the court’s decision vacating the 2012 cellulosic volumes, today’s decision once again rejects broad-brushed attempts to effectively roll back the federal Renewable Fuel Standard.”
The intervenor biofuel organizations are reviewing the court’s decision and assessing next steps in the matter.
For more information, call 202-545-4000.
Court blocks 2012 cellulosic biofuel target
http://newsandinsight.thomsonreuters.com/Legal/News/2013/01_-_January/Court_blocks_2012_cellulosic_biofuel_target/
By Ayesha Rascoe
WASHINGTON, Jan 25 (Reuters) - A U.S. federal court on Friday struck down a 2012 target for refiner use of cellulosic biofuels, but upheld the government's goal for use of other advanced fuels.
The divided ruling by the D.C. Circuit Court allowed oil refiners to claim a partial victory after fighting against U.S. renewable fuel targets. But it also gave hope to biofuel producers, who have been defending the mandates.
The American Petroleum Institute filed a lawsuit against the Environmental Protection Agency's 2012 target, requiring refiners to mix 8.65 million gallons of cellulosic biofuels into the U.S. gasoline and diesel.
Cellulosic biofuels are made from sources such as grasses, wood chips and agricultural waste.
When Congress passed the Renewable Fuel Standard in 2005 with the goal of reducing U.S. reliance on oil, it expected such fuels would make up a significant portion of its mandated use of 36 billion gallons of biofuel by 2022.
But development of the innovative fuel source has lagged and refiners argue they should not be punished for failing to use a fuel that is not commercially available.
Every year refiners have to prove they have used a certain amount of advanced biofuels or have bought credits representing use of the fuel by others in an open market. If they do neither they are subject to fines.
The court upheld API's case regarding the cellulosic goal, finding the EPA did not make a "neutral" assessment of the amount of cellulosic biofuels that would be produced last year.
"We are glad the court has put a stop to EPA's pattern of setting impossible mandates for a biofuel that does not even exist," said API Group Downstream Director Bob Greco.
API said refiners and importers would have had to pay over $8 million for credits to fulfill the 2012 mandate.
While an agency may set standards to promote future technology, in this case the court said there was no clear link between the regulations and the innovation.
"Apart from their role as captive consumers, the refiners are in no position to ensure, or even contribute to, growth in the cellulosic biofuel industry," the court said.
Still, the court rejected API's challenge to the government's decision not to lower its goal for use of advanced biofuels in general.
The court agreed with EPA's finding that other advanced biofuels, including imported sugarcane ethanol and biomass-based diesel, could make up for the shortfall in Congress' goal of 500 million gallons of cellulosic ethanol use in 2012.
EPA is reviewing the court's decision and "will determine its next steps," the agency said in a statement.
A coalition of biofuel groups said the court's ruling allows EPA to reinstate the target it had set, as long as the agency could provide information backing the agency's assessment at the time that the volumes were "reasonable achievable."
The court did not accept API's arguments that EPA had to use projections from the Energy Information Administration to set its goals and that the agency should not consider information from cellulosic biofuel producers.
"Although we disagree with the court's decision vacating the 2012 cellulosic volumes, today's decision once again rejects broad-brushed attempts to effectively roll back the federal Renewable Fuel Standard," said the coalition, which included Growth Energy and the Renewable Fuels Association.
(Additional reporting by Timothy Gardner)
1/25/2013
WASHINGTON, Jan 25 (Reuters) - A U.S. federal court on Friday struck down a 2012 target for refiner use of cellulosic biofuels, but upheld the government's goal for use of other advanced fuels.
The divided ruling by the D.C. Circuit Court allowed oil refiners to claim a partial victory after fighting against U.S. renewable fuel targets. But it also gave hope to biofuel producers, who have been defending the mandates.
The American Petroleum Institute filed a lawsuit against the Environmental Protection Agency's 2012 target, requiring refiners to mix 8.65 million gallons of cellulosic biofuels into the U.S. gasoline and diesel.
Cellulosic biofuels are made from sources such as grasses, wood chips and agricultural waste.
When Congress passed the Renewable Fuel Standard in 2005 with the goal of reducing U.S. reliance on oil, it expected such fuels would make up a significant portion of its mandated use of 36 billion gallons of biofuel by 2022.
But development of the innovative fuel source has lagged and refiners argue they should not be punished for failing to use a fuel that is not commercially available.
Every year refiners have to prove they have used a certain amount of advanced biofuels or have bought credits representing use of the fuel by others in an open market. If they do neither they are subject to fines.
The court upheld API's case regarding the cellulosic goal, finding the EPA did not make a "neutral" assessment of the amount of cellulosic biofuels that would be produced last year.
"We are glad the court has put a stop to EPA's pattern of setting impossible mandates for a biofuel that does not even exist," said API Group Downstream Director Bob Greco.
API said refiners and importers would have had to pay over $8 million for credits to fulfill the 2012 mandate.
While an agency may set standards to promote future technology, in this case the court said there was no clear link between the regulations and the innovation.
"Apart from their role as captive consumers, the refiners are in no position to ensure, or even contribute to, growth in the cellulosic biofuel industry," the court said.
Still, the court rejected API's challenge to the government's decision not to lower its goal for use of advanced biofuels in general.
The court agreed with EPA's finding that other advanced biofuels, including imported sugarcane ethanol and biomass-based diesel, could make up for the shortfall in Congress' goal of 500 million gallons of cellulosic ethanol use in 2012.
EPA is reviewing the court's decision and "will determine its next steps," the agency said in a statement.
A coalition of biofuel groups said the court's ruling allows EPA to reinstate the target it had set, as long as the agency could provide information backing the agency's assessment at the time that the volumes were "reasonable achievable."
The court did not accept API's arguments that EPA had to use projections from the Energy Information Administration to set its goals and that the agency should not consider information from cellulosic biofuel producers.
"Although we disagree with the court's decision vacating the 2012 cellulosic volumes, today's decision once again rejects broad-brushed attempts to effectively roll back the federal Renewable Fuel Standard," said the coalition, which included Growth Energy and the Renewable Fuels Association.
(Additional reporting by Timothy Gardner)
Thursday, January 3, 2013
Sundrop Fuels to buy Cowboy Town for $2.5 million
http://www.thetowntalk.com/article/20130103/NEWS01/301030310/Sundrop-Fuels-buy-Cowboy-Town-2-5-million?nclick_check=1
3:15 PM,
Jan 3, 2013
|
Sundrop Fuels Inc. is reportedly buying the former Cowboy Town
property in Boyce. Sundrop plans to build a biofuel plant on land
adjacent to the former entertainment venue. / Tia
Owens-Powers/towens@thetowntalk.com
After years of uncertainty, Cowboy Town finally may have a long-term owner.
The
former entertainment venue off Interstate 49 is being purchased by
Sundrop Fuels, which plans to invest nearly half a billion dollars to
develop a pilot plant for biofuel on adjacent land in the Rapides
Station area.
The
Cowboy Town property in Boyce includes nearly 28 acres and a building of
approximately 200,000 square feet. The Rapides Parish Clerk of Court
Office did not have a record of the transaction, but local real estate
professional Rod Noles reported a sale price of $2.5 million on his
radio show Wednesday.
Cowboy
Town's most recent owner was Yahweh LLC, a venture by local businessmen
James Greer and Richard Kyle. They purchased the property in March for
$1.5 million, though there were significant additional costs involved,
including liens.
Greer
confirmed the sale but referred comment to Steven Silvers, director of
corporate communications for Sundrop Fuels, who could not be reached
Wednesday.
Before Yahweh bought the property, it was the subject of almost constant speculation, most of which turned out to be only that.
Cowboy
Town opened in 2001 as a 4,000-seat venue for events such as rodeos and
concerts. Its original announced value was $5 million. It lasted only a
few months, though, before closing for financial reasons.
After
talk of turning it into a training center for USA Boxing failed to
materialize, it was purchased by businessman Ken Moran at a bankruptcy
auction for $2.9 million in September 2004.
Under
Moran's ownership, there was more talk about what Cowboy Town would or
could be, but little action. Among the speculation was that a local
institution of higher education would purchase the property, or that the
parish would buy it was a replacement for the Rapides Coliseum.
The
former Donahue Family Church in Pineville agreed to purchase the
property for $4.85 million in 2007 and made an $800,000 down payment.
That deal fell through, though, after a split in the church.
In
2011, a real estate agent representing Moran confirmed that an
agreement to sell the venue was in place, but that, too, fell through.
Sundrop
Fuels, a Colorado-based startup, announced plans in 2011 to build the
first production facility of its vehicle-ready "green gasoline" in the
Alexandria area. The fuel is produced from woody biomass and natural
gas.
The $450 million plant will sit on more than 1,200 acres that surround the former Cowboy Town property.
Sundrop Fuels Inc. is reportedly buying the former Cowboy Town
property in Boyce. Sundrop plans to build a biofuel plant on land
adjacent to the former entertainment venue. / Tia
Owens-Powers/towens@thetowntalk.com
The
former entertainment venue off Interstate 49 is being purchased by
Sundrop Fuels, which plans to invest nearly half a billion dollars to
develop a pilot plant for biofuel on adjacent land in the Rapides
Station area.
The
Cowboy Town property in Boyce includes nearly 28 acres and a building of
approximately 200,000 square feet. The Rapides Parish Clerk of Court
Office did not have a record of the transaction, but local real estate
professional Rod Noles reported a sale price of $2.5 million on his
radio show Wednesday.
Cowboy
Town's most recent owner was Yahweh LLC, a venture by local businessmen
James Greer and Richard Kyle. They purchased the property in March for
$1.5 million, though there were significant additional costs involved,
including liens.
Greer
confirmed the sale but referred comment to Steven Silvers, director of
corporate communications for Sundrop Fuels, who could not be reached
Wednesday.
Before Yahweh bought the property, it was the subject of almost constant speculation, most of which turned out to be only that.
Cowboy
Town opened in 2001 as a 4,000-seat venue for events such as rodeos and
concerts. Its original announced value was $5 million. It lasted only a
few months, though, before closing for financial reasons.
After
talk of turning it into a training center for USA Boxing failed to
materialize, it was purchased by businessman Ken Moran at a bankruptcy
auction for $2.9 million in September 2004.
Under
Moran's ownership, there was more talk about what Cowboy Town would or
could be, but little action. Among the speculation was that a local
institution of higher education would purchase the property, or that the
parish would buy it was a replacement for the Rapides Coliseum.
The
former Donahue Family Church in Pineville agreed to purchase the
property for $4.85 million in 2007 and made an $800,000 down payment.
That deal fell through, though, after a split in the church.
In
2011, a real estate agent representing Moran confirmed that an
agreement to sell the venue was in place, but that, too, fell through.
Sundrop
Fuels, a Colorado-based startup, announced plans in 2011 to build the
first production facility of its vehicle-ready "green gasoline" in the
Alexandria area. The fuel is produced from woody biomass and natural
gas.
Monday, December 31, 2012
Biofuels Digest’s 2012 Best Project (Thermochemical) Award: KiOR — Columbus, Mississippi
http://www.biofuelsdigest.com/bdigest/2012/12/31/biofuels-digests-2012-best-project-thermochemical-award-kior-columbus-mississippi/
Jim Lane
|
December 31, 2012
There’s much to admire about KiOR’s first small commercial project – but three factors stood out for us.
It was built on time, on budget, and produces a drop-in, cellulosic product. That’s transformative on three levels — and with scale-up to the 60 million gallon level, the economics are expected to be as compelling as the story. For any producer of wood products, its one of the best bits of news to come down the pikeway in a long, long time.
READ MORE: All about the project, here.
It was built on time, on budget, and produces a drop-in, cellulosic product. That’s transformative on three levels — and with scale-up to the 60 million gallon level, the economics are expected to be as compelling as the story. For any producer of wood products, its one of the best bits of news to come down the pikeway in a long, long time.
READ MORE: All about the project, here.
Friday, December 21, 2012
Can KiOR soar?
http://www.biofuelsdigest.com/bdigest/2012/12/21/can-kior-soar/
Jim Lane
|
December 21, 2012
By: Robert Rapier, Energy Trends Insider
Last month KiOR announced the start of production of biocrude from their Columbus, Mississippi plant. KiOR CEO Fred Cannon stated in an earnings call that when the product shipped it would be “the world’s first cellulosic gasoline and diesel fuel products.” While I can immediately think of at least 4 other companies who previously made cellulosic diesel and/or gasoline — Choren , Rentech, Envergent, and Community Power Corporation — we can forgive Mr. Cannon for this oversight in his excitement.
Some readers may recall that a year ago I argued that KiOR’s then $2 billion market capitalization was much too high based on the technical risks, the value of competing companies, and the fact that ultimately they were more like an oil refiner than a high tech company.
Since that column was published, the market cap of KiOR has plunged to $636 million. But now that production has begun, I have been asked several times whether my opinion of KiOR has changed.
Bear in mind that my view was never that KiOR had an unworkable or unscalable technology (although a number of incorrect or misleading facts about the company’s process were widely reported). But my view was that they still had a very rough path to commercialization, and their value a year ago reflected the irrational exuberance that existed across the sector. I still believe that KiOR’s odds for long-term success are long, but they have hired competent people to give them the best chance of making it.
Initial production is an important milestone, but other important milestones are ahead. Many pitfalls await, and most companies in this space will fail to navigate them. But their technology is legitimate. Further, the Department of Energy forecast earlier this year that while the current cost to produce gasoline from pyrolysis oil is well above the cost to produce gasoline from petroleum, by 2017 the cost of pyrolysis-based gasoline is projected to fall to $2.32/gallon.
Biofuels Digest reported that KiOR’s projected production cost upon scale-up in 2013 would be $5.95/gallon. Further projections are that as they proceed up the learning curve and scale further that the cost of production would fall to $3.73 per gallon in 2014, and then to $2.62 per gallon at full-scale.
The company faces risks around biomass costs, natural gas costs (a very important input which becomes clear when one notices that reported fuel outputs of 11 million gallons per year have much greater energy content than the reported wood inputs of 500 bone dry tons per day), and their ability to raise additional funds that will be required for continued scale-up.
As a result, I think KiOR’s share price will continue to be volatile. In the short term, continued incentives for 2nd generations biofuels will help ease their burn rate. But as long as government support of 2nd generation biofuels remains after the fiscal cliff dust settles, KiOR has a realistic chance of crossing the Valley of Death and becoming a company that could maintain a viable business.
This article was republished with permission from Consumer Energy Report under a content partnership with Biofuels Digest, and originally appeared in Energy Trends Insider, a free newsletter from Consumer Energy Report focusing on financial and investment issues in the energy industry.
Last month KiOR announced the start of production of biocrude from their Columbus, Mississippi plant. KiOR CEO Fred Cannon stated in an earnings call that when the product shipped it would be “the world’s first cellulosic gasoline and diesel fuel products.” While I can immediately think of at least 4 other companies who previously made cellulosic diesel and/or gasoline — Choren , Rentech, Envergent, and Community Power Corporation — we can forgive Mr. Cannon for this oversight in his excitement.
Some readers may recall that a year ago I argued that KiOR’s then $2 billion market capitalization was much too high based on the technical risks, the value of competing companies, and the fact that ultimately they were more like an oil refiner than a high tech company.
Since that column was published, the market cap of KiOR has plunged to $636 million. But now that production has begun, I have been asked several times whether my opinion of KiOR has changed.
Bear in mind that my view was never that KiOR had an unworkable or unscalable technology (although a number of incorrect or misleading facts about the company’s process were widely reported). But my view was that they still had a very rough path to commercialization, and their value a year ago reflected the irrational exuberance that existed across the sector. I still believe that KiOR’s odds for long-term success are long, but they have hired competent people to give them the best chance of making it.
Initial production is an important milestone, but other important milestones are ahead. Many pitfalls await, and most companies in this space will fail to navigate them. But their technology is legitimate. Further, the Department of Energy forecast earlier this year that while the current cost to produce gasoline from pyrolysis oil is well above the cost to produce gasoline from petroleum, by 2017 the cost of pyrolysis-based gasoline is projected to fall to $2.32/gallon.
Biofuels Digest reported that KiOR’s projected production cost upon scale-up in 2013 would be $5.95/gallon. Further projections are that as they proceed up the learning curve and scale further that the cost of production would fall to $3.73 per gallon in 2014, and then to $2.62 per gallon at full-scale.
The company faces risks around biomass costs, natural gas costs (a very important input which becomes clear when one notices that reported fuel outputs of 11 million gallons per year have much greater energy content than the reported wood inputs of 500 bone dry tons per day), and their ability to raise additional funds that will be required for continued scale-up.
As a result, I think KiOR’s share price will continue to be volatile. In the short term, continued incentives for 2nd generations biofuels will help ease their burn rate. But as long as government support of 2nd generation biofuels remains after the fiscal cliff dust settles, KiOR has a realistic chance of crossing the Valley of Death and becoming a company that could maintain a viable business.
This article was republished with permission from Consumer Energy Report under a content partnership with Biofuels Digest, and originally appeared in Energy Trends Insider, a free newsletter from Consumer Energy Report focusing on financial and investment issues in the energy industry.
Sunday, December 16, 2012
Greener planet is goal for 3 startups
http://www.equities.com/news/headline-story?dt=2012-12-16&val=832224&cat=material
By Julie Wernau, Chicago Tribune McClatchy-Tribune Information Services
By Julie Wernau, Chicago Tribune McClatchy-Tribune Information Services
Dec.
16--If the glut of companies billing themselves as "solutions"
providers is any indication, the world has no shortage of problems.
Green
tech companies take on some of the most complicated, difficult problems
to solve. They tend to be problems created by our mere existence, chief
among them our massive demand for energy. The more we rely on energy to
power our electronics, our vehicles and our lives, the more pollution
we churn into our land, water and air.
The
Tribune checked in with three local green tech startups at various
stages of development. They haven't changed the world yet, but they're
working on it.
COMPANY: LanzaTech
PROBLEM TO BE SOLVED: Global warming, a huge challenge as energy demand is expected to double within 40 years.
FUNDS RAISED: $100 million
It may sound like sci-fi, but LanzaTech produces gas-eating "bugs" that don't require oxygen to survive.
In
April, the company's microscopic bacteria began ingesting carbon
monoxide from a steel mill in China. Carbon monoxide goes in one end of
the bacteria and ethanol comes out the other.
With
a few genetic tweaks, the bug can produce a wide range of fuels and
chemicals from gases that companies spend money to get rid of. The idea,
says Jennifer Holmgren, the company's chief executive, is to trap nasty
gases that float from steel mills, power plants and chemical factories,
turning them into products that are useful and profitable.
The
company recently inked a deal with Petronas, the national oil company
of Malaysia, to develop a modified version of the bug that takes in
carbon dioxide and produces acetic acid, a chemical companies need to
produce polymers used in plastics.
"Rather
than trying to sequester carbon deep into the earth, we will 'bury' it
in a chemical," Holmgren said. "In this way, companies can not only
comply with emissions reduction requirements, but also generate revenue
along the way."
When
Holmgren talks about the technology's potential, she pulls up a map of
the world, showing partnerships and agreements the company has with
companies from Boeing Co. in Chicago and Kansas-based Invista, the
world's largest nylon producer, to Indian Oil Co. in New Delhi and
Mitsui & Co. Ltd. in Japan.
Out
of the company's various projects, the carbon monoxide-eating bacteria
are the furthest along in the path toward commercialization. This month,
LanzaTech finished a demonstration project for China's largest steel
manufacturer, Baosteel, at a plant near Shanghai.
LanzaTech
successfully produced the equivalent of more than 100,000 gallons of
ethanol per year from just a fraction of the carbon monoxide the company
creates in the steel-making process.
"You're
literally driving for miles watching this steel mill," Holmgren said,
explaining its vast size -- and its potential to produce hundreds of
millions of gallons of ethanol per year.
The
technology creates a financial incentive to trap the gas rather than
flare it, a common practice that produces carbon dioxide, which
contributes to global warming. Through a series of pipes, the gas enters
a vessel filled with the organism, which is floating in water. Fuel
comes out the back end and is pumped through a distiller to create pure
ethanol.
Because
of the success of that demonstration, the steel company has ordered the
first of what will eventually be three or four units, each about $80
million, that are each expected to produce 30 million to 50 million
gallons of ethanol per year. Each unit pays itself back in under five
years, Holmgren said.
"We don't want it to be green for green's sake. If it is, no one is going to use it," she said.
With
140 employees worldwide, LanzaTech doesn't have any revenues to report
yet. Holmgren said LanzaTech expects to grow to profitability between
2013 and 2015.
Monday, December 3, 2012
LanzaTech to Convert Baosteel Mill Fumes Into Ethanol, CEO Says
http://www.bloomberg.com/news/2012-12-03/lanzatech-to-convert-baosteel-mill-fumes-into-ethanol-ceo-says.html
By Andrew Herndon - Dec 3, 2012 8:00 AM ET
LanzaTech NZ Ltd., a closely held developer of transportation fuels and chemicals from waste industrial gases, plans to begin building next year an ethanol plant at a Baosteel Group Corp. steel mill in China.
The facility will use LanzaTech’s genetically-modified microorganisms to convert carbon monoxide-containing gas into as much as 10 million gallons of fuel-grade ethanol a year starting in 2014, Chief Executive Jennifer Holmgren said by telephone Nov. 30. Financing is being arranged by Baosteel, she said, and wouldn’t disclose the expected cost.
The project is a joint venture with Baosteel, China’s second largest steel manufacturer, and scales up a 100,000 gallon a year demonstration plant the companies installed at one of Baosteel’s mills near Shanghai. Results from that project “have shown that the scaling of the technology has been successful,” LanzaTech, based in Auckland, New Zealand, said in an e-mailed statement.
LanzaTech also has a venture with Shougang Group, China’s fourth-largest steelmaker, and industrial companies in India, South Korea, Taiwan and Japan are evaluating projects with the company. Holmgren told Bloomberg in January she may begin considering an IPO after successful operations of the Baosteel demonstration.
To contact the reporter on this story: Andrew Herndon in San Francisco at aherndon2@bloomberg.net
To contact the editor responsible for this story: Reed Landberg at landberg@bloomberg.net
By Andrew Herndon - Dec 3, 2012 8:00 AM ET
LanzaTech NZ Ltd., a closely held developer of transportation fuels and chemicals from waste industrial gases, plans to begin building next year an ethanol plant at a Baosteel Group Corp. steel mill in China.
The facility will use LanzaTech’s genetically-modified microorganisms to convert carbon monoxide-containing gas into as much as 10 million gallons of fuel-grade ethanol a year starting in 2014, Chief Executive Jennifer Holmgren said by telephone Nov. 30. Financing is being arranged by Baosteel, she said, and wouldn’t disclose the expected cost.
The project is a joint venture with Baosteel, China’s second largest steel manufacturer, and scales up a 100,000 gallon a year demonstration plant the companies installed at one of Baosteel’s mills near Shanghai. Results from that project “have shown that the scaling of the technology has been successful,” LanzaTech, based in Auckland, New Zealand, said in an e-mailed statement.
LanzaTech also has a venture with Shougang Group, China’s fourth-largest steelmaker, and industrial companies in India, South Korea, Taiwan and Japan are evaluating projects with the company. Holmgren told Bloomberg in January she may begin considering an IPO after successful operations of the Baosteel demonstration.
To contact the reporter on this story: Andrew Herndon in San Francisco at aherndon2@bloomberg.net
To contact the editor responsible for this story: Reed Landberg at landberg@bloomberg.net
Monday, November 26, 2012
The New Syngas: New catalysts, opportunities for advanced biofuels
http://www.biofuelsdigest.com/bdigest/2012/11/26/the-new-syngas-new-catalysts-opportunities-for-advanced-biofuels/
Combined with investments in liquefied petroleum gas and compressed natural gas, New Zealand at one point reduced its dependency on imported oil from 85 percent to under 50 percent. When crude oil prices dropped dramatically in the mid-1990s, the Synfuel plant stopped making gasoline from natural gas for economic reasons.
The bottom line: there’s a known path from syngas to gasoline, that makes sense economically in given price conditions.
In the biofuels revolution, the primary focus has been not on producing methanol (and, ultimately, gasoline) from syngas, but primarily on the production of ethanol. Three of the major names in the field- LanzaTech, INEOS Bio and Coskata – developed pathways for fermenting syngas using proprietary micro-organisms. INEOS Bio’s first small commercial plant was completed this year in Florida, while LanzaTech and Coskata have completed demonstrations of their technology. ZeaChem developed a hybrid system that included thermochemically converting biomass to ethanol via syngas, too.
When interest in drop-in renewable fuels began to increase in the late 2000s — given the costs of infrastructure change that ethanol required to reach high blend rates with gasoline — syngas continued to appear in the technology paths of companies like Rentech and Velocys (using modified F-T technologies).
Then, in the past two years, Sundrop Fuels and Primus Green Energy emerged from stealth with technologies that produced renewable gasoline from wood biomass, by first making syngas, then methanol, then gasoline — and ultimately embraced a flexible feedstock strategy that included natural gas. Primus is expected to complete its demonstration-scale plant by the end of Q1 2013.
By now, we’ve gone full-circle with the technologies – back to the same ideas that drove the New Zealand project in days gone by. XTL technologies that utilize biomass, coal or gas to produce syngas – and thence a pathways to affordable fuels – are very much in vogue at the moment.
But as Robert Rapier pointed out recently in the Digest: “The two major problems with any of the XTL technologies are that capital costs are extremely high, and a long-term, cheap feedstock supply must be secured. Shell’s initial estimate for the [Pearl GTL] plant was $5 billion, but by the time the project was completed the costs were estimated to be around $20 billion.”
So, what can be done? One, in the US and Canada there is the startling differential between the cost (per MMBTU) or natural gas, compared to crude oil. Two, critical improvements in processing technology – in most cases, moving beyond traditional Fischer-Tropsch technologies – that make projects work economically at a more flexible range of scales (and thereby, reduce capex) as well as reducing the operating costs.
Last March in New Jersey, Primus announced that it has completed its third round of funding with the recent $12 million investment by IC Green Energy Ltd, the renewable energy arm of Israel Corp. Ltd. This latest investment brings the total of funds raised since 2007 to $40 million. Primus already has a pilot test plant in operation at its Hillsborough complex, and the company hopes to break ground in early 2013 on its first commercial plant.
The company says that, at scale, it can produce gasoline at a price competitive with gasoline produced from petroleum at $60-$70 per barrel, based on a scale of 25-27 million gallons for its first commercial plant, and designs for up to four units with a capacity of 100 million gallons.
That’s also the essence in Rapier’s warnings about the attractions of GTL technologies – going all-in on a feedstock whose price may flip into an unsustainable relationship to crude oil. So, it’s important to see the extension of technologies like Coskata, Primus and Sundrop into natural gas as a hedge against biomass prices rather than an abandonment of biomass.
First, biomass is gasified into syngas. If using natural gas, the NG is steam reformed into syngas using known technologies. Syngas is converted into methanol using known methanol synthesis and distillation technologies that companies like Johnson Matthey have provided for years. Finally, a variant of the ExxonMobil MTG (methanol-to-gasoline) process is used to make the final product.
Their secret sauce lies, as with many companies in the thermochemical space, in the proprietary catalysts and other improvements made in the basic process to make reactions faster and more efficient.
“We have had some discussions re Israel,” Johnsen said, “and the issue is the sequence of building plants more than anything else. If I had my druthers, our first commercial would be one car ride from our facilities here [in New Jersey]. We’ve looked at Louisiana, Texas, the Upper Midwest and Pennsylvania, among other locations. Ideally, we’d like to have as many options to tap into natgas pipelines or any source of syngas available, and those industrial gases that become available to us.”
Jim Lane
|
November 26, 2012
Primus Green Energy looks to an improved syngas-to-gasoline process as a renewable fuel game-changer.
Back in the 1970s energy crisis, the Brazilian government now (famously) marched down their path towards energy independence via ethanol produced from sugarcane – but it is less well known that the New Zealand government embarked on a unique program of its own. They fostered the building of the Motunui Synthetic Fuels Plant, which opened in 1986 with a goal of converting natural gas to gasoline, via an intermediate conversion steps into syngas and then methanol.Combined with investments in liquefied petroleum gas and compressed natural gas, New Zealand at one point reduced its dependency on imported oil from 85 percent to under 50 percent. When crude oil prices dropped dramatically in the mid-1990s, the Synfuel plant stopped making gasoline from natural gas for economic reasons.
The bottom line: there’s a known path from syngas to gasoline, that makes sense economically in given price conditions.
In the biofuels revolution, the primary focus has been not on producing methanol (and, ultimately, gasoline) from syngas, but primarily on the production of ethanol. Three of the major names in the field- LanzaTech, INEOS Bio and Coskata – developed pathways for fermenting syngas using proprietary micro-organisms. INEOS Bio’s first small commercial plant was completed this year in Florida, while LanzaTech and Coskata have completed demonstrations of their technology. ZeaChem developed a hybrid system that included thermochemically converting biomass to ethanol via syngas, too.
When interest in drop-in renewable fuels began to increase in the late 2000s — given the costs of infrastructure change that ethanol required to reach high blend rates with gasoline — syngas continued to appear in the technology paths of companies like Rentech and Velocys (using modified F-T technologies).
Then, in the past two years, Sundrop Fuels and Primus Green Energy emerged from stealth with technologies that produced renewable gasoline from wood biomass, by first making syngas, then methanol, then gasoline — and ultimately embraced a flexible feedstock strategy that included natural gas. Primus is expected to complete its demonstration-scale plant by the end of Q1 2013.
By now, we’ve gone full-circle with the technologies – back to the same ideas that drove the New Zealand project in days gone by. XTL technologies that utilize biomass, coal or gas to produce syngas – and thence a pathways to affordable fuels – are very much in vogue at the moment.
But as Robert Rapier pointed out recently in the Digest: “The two major problems with any of the XTL technologies are that capital costs are extremely high, and a long-term, cheap feedstock supply must be secured. Shell’s initial estimate for the [Pearl GTL] plant was $5 billion, but by the time the project was completed the costs were estimated to be around $20 billion.”
So, what can be done? One, in the US and Canada there is the startling differential between the cost (per MMBTU) or natural gas, compared to crude oil. Two, critical improvements in processing technology – in most cases, moving beyond traditional Fischer-Tropsch technologies – that make projects work economically at a more flexible range of scales (and thereby, reduce capex) as well as reducing the operating costs.
Primus Green Energy
Take Primus as an example. “a difference between us and FT,” notes CEO Robert Johnsen, one of the co-founders of Mascoma before moving to Primus last year, “is that we are competitive at 25 million gallon scale. Also, modularization could be an option.”Last March in New Jersey, Primus announced that it has completed its third round of funding with the recent $12 million investment by IC Green Energy Ltd, the renewable energy arm of Israel Corp. Ltd. This latest investment brings the total of funds raised since 2007 to $40 million. Primus already has a pilot test plant in operation at its Hillsborough complex, and the company hopes to break ground in early 2013 on its first commercial plant.
The company says that, at scale, it can produce gasoline at a price competitive with gasoline produced from petroleum at $60-$70 per barrel, based on a scale of 25-27 million gallons for its first commercial plant, and designs for up to four units with a capacity of 100 million gallons.
Feedstock flexibility
LanzaTech’s Jennifer Holmgren once warned the Digest. “it’s important not to marry a feedstock.”That’s also the essence in Rapier’s warnings about the attractions of GTL technologies – going all-in on a feedstock whose price may flip into an unsustainable relationship to crude oil. So, it’s important to see the extension of technologies like Coskata, Primus and Sundrop into natural gas as a hedge against biomass prices rather than an abandonment of biomass.
The PGE technology
Conceptually, its not a difficult technology to understand.First, biomass is gasified into syngas. If using natural gas, the NG is steam reformed into syngas using known technologies. Syngas is converted into methanol using known methanol synthesis and distillation technologies that companies like Johnson Matthey have provided for years. Finally, a variant of the ExxonMobil MTG (methanol-to-gasoline) process is used to make the final product.
Their secret sauce lies, as with many companies in the thermochemical space, in the proprietary catalysts and other improvements made in the basic process to make reactions faster and more efficient.
Greenfield or co-locate?
In the case of PGE, there are existing sources of syngas that might be tapped. “There is a whole menu of syngas options and sources I didn’t know about when we first set out to look at it,” said PGE’s Johnsen. “There’s waste syngas from industrial process, methane gas from MSW, syngas from coal. So, there’s an investigation that goes on to determine whether its better to purchase syngas over the fence, and achieve lower capex costs – or do a greenfield plant and produce syngas on site using known technologies.”Geographies
In part, the decision rests not only on the geographies of syngas as a feedstock, but on the availability and cost of wood biomass and natural gas. In particular, its notable that Israel has had some startling natgas discoveries and Israeli investors are behind PGE.“We have had some discussions re Israel,” Johnsen said, “and the issue is the sequence of building plants more than anything else. If I had my druthers, our first commercial would be one car ride from our facilities here [in New Jersey]. We’ve looked at Louisiana, Texas, the Upper Midwest and Pennsylvania, among other locations. Ideally, we’d like to have as many options to tap into natgas pipelines or any source of syngas available, and those industrial gases that become available to us.”
Capex
One of the compelling claims of the PGE technology is its low capex. “In this space,” said Johnsen, “costs for first plants between $10-$20 per gallon of capacity are common. But, the capital efficiency of this design gives us a capex of $10 per gallon or less. And, anyone in the alternative fuels space assumes that the 2nd and 3rd plant, even with same capacity, will cost 10-20 percent less. The first plants are burdened by redundancies , and with experience you can cast off some costs and get to a leaner, more realistic process design.”The bottom line
There’s syngas, and the new syngas. The sources appear to be widespread, and the minimum scales for commercial viability appear to have come down sharply – and the emergence of low-cost natural gas has added new investor interest as well as a solid hedge against upside down biomass vs crude oil economics. The technologies are heading for commercial scale now – so we can expect to see them emerge by mid-decade, proven at scale, if they are able to convert investor interest into commitment, and prove out the technology at scale.
Labels:
Alabama,
biomass,
cellulosic ethanol,
cellulosic gasoline,
Coskata,
ethanol,
Florida,
Georgia,
industry,
LanzaTech,
Louisiana,
methanol,
natural gas,
southeastern US,
Sundrop,
syngas,
technology,
woody biomass
Subscribe to:
Posts (Atom)